Sign In/Register




You are here: Home » Articles » How to Switch to Digital TV


How to Switch to Digital TV

Posted on: August 18, 2011

If you have a television that uses an antenna or is connected to cable or TIVO, you may be affected by the switch to digital TV that is scheduled to occur on February 17, 2009. This page will explain what you need to know and what you can do to help ensure you are able to continue watching television on February 18.

Digital Switch Tips

  1. On February 17, 2009, television stations will stop broadcasting analog signals.
  2. Anyone who receives signals over the air will require a digital signal or a converter box.
  3. Older analog televisions should not be thrown out.
  4. VCRs and DVD recorders, like televisions, may also be affected.
  5. Converter boxes can be purchased at almost any electronics store.
  6. The government has a coupon program that allows consumers to obtain converters at a reduced rate.
  7. Do not purchase a new or used television, VCR, or DVR unless it states it has a digital tuner built in or you know you can make it work.

If you have a television that uses an antenna or is connected to cable or TIVO, you may be affected by the switch to digital TV that is scheduled to occur on February 17, 2009. This page will explain what you need to know and what you can do to help ensure you are able to continue watching television on February 18.

Digital Switch Tips

  1. On February 17, 2009, television stations will stop broadcasting analog signals.
  2. Anyone who receives signals over the air will require a digital signal or a converter box.
  3. Older analog televisions should not be thrown out.
  4. VCRs and DVD recorders, like televisions, may also be affected.
  5. Converter boxes can be purchased at almost any electronics store.
  6. The government has a coupon program that allows consumers to obtain converters at a reduced rate.
  7. Do not purchase a new or used television, VCR, or DVR unless it states it has a digital tuner built in or you know you can make it work.

</note>

Introduction

Who Will Be Affected

  • People who receive over-the-air television broadcasts through the use of an antenna will be the most affected. However, antenna users are not the only ones who will be affected. Cable and TiVo users may also be affected. In fact, it seems the only people who won't be affected are ones who have all their televisions connected to a satellite system, such as DISH Network or DIRECTV.
  • To know if you will be affected, first you should figure out if your television and VCR or DVR has a digital tuner. If they do, then you will not be affected. If they don't, then you may or may not be affected:
  1. If you subscribe to satellite TV and all your TVs are connected to that service, you are fine.
  2. If you subscribe to cable, you may be affected. Check out the section on What Cable Customers Need to Know.
  3. If you receive your television signal over the air through the use of an antenna, then you are most at risk for being affected. You will need to check out the section on What Antenna Users Need to Know.
  4. If you use TiVo, you could also be affected. Check out the section on What TiVo Customers Need to Know.
  5. If you use a VCR or DVR that is not connected to a cable box or satellite, check out the section on VCRs and DVRs even if your TV has a digital tuner.

Does Your Television Have a Digital or Analog Tuner?

  • When your television receives a signal, it translates it using either an analog (NTSC) or digital (ATSC) tuner. If your television has a digital tuner, then the switch will not affect you. If you do not know what type of tuner your television has, then you will need to do a bit of detective work. How does one tell if their television is digital or analog? Here's how you can tell:
  1. All televisions built before 1999 are analog.ABC News: Digital Dilemma: Will Your TV Go Dark? (February 15, 2008)
  2. All 35-inch or larger televisions built after July 2005 are digital.ConsumerReports.org: How to Survive the Digital TV Transition
  3. All 25-inch or smaller televisions built after March 2006 are digital.ConsumerReports.org: How to Survive the Digital TV Transition
  4. All televisions shipped or sold after March 1, 2007, are digital.Federal Communications Commission: All-Digital Television Is Coming (and Sooner Than You Think!)
  5. Televisions are digital if they have any of the following words on them: ATSC Integrated Digital Tuner, Digital Tuner Built-In, Digital Receiver, Digital Tuner, DTV or HDTV.Federal Communications Commission: All-Digital Television Is Coming (and Sooner Than You Think!)
  6. If your television is labeled with the words Digital Monitor, HDTV Monitor, Digital Ready or HDTV Ready, it may not be digital.Federal Communications Commission: All-Digital Television Is Coming (and Sooner Than You Think!)
  7. Check the manual for your television under specs and it should tell you if it is ATSC (digital) or NTSC (analog).ABC News: Digital Dilemma: Will Your TV Go Dark? (February 15, 2008)
  8. Using your remote, check your television's setup menu. Select "search for channels" to see if you have an option for digital channels.ABC News: Digital Dilemma: Will Your TV Go Dark? (February 15, 2008)
  9. Check with your set's manufacturer.

What Cable Customers Need to Know

What TiVo Customers Need to Know

What Antenna Users Need to Know

How to Connect a Converter Box

  • Before beginning, use some masking tape and label each end of your coaxial cables. One end should read out and the other in. This will help ensure that you get your cables in the right location.
  1. If your antenna does not have a coaxial cable already connected, take a coaxial cable and connect it to your antenna (out jack). Next, attach this cable to the in jack of the converter box.
    • Out from Antenna --> In to the converter box
  2. Take a second coaxial cable and connect it to the out jack of the converter box. Then, attach the other end to the TV (in jack).
    • Out from converter box --> In to the TV

Adding a VCR, DVR or TiVo

  • If you are connecting your VCR/DVR, it can help if you picture your TV channel going out from the antenna, into the converter box (to convert it to a picture). It then goes out from the converter box in to the VCR/DVR so it can get recorded. Then, it goes out from the VCR/DVR and in to the TV so you can see the image.
  1. If your antenna does not have a coaxial cable already connected, take a coaxial cable and connect it to your antenna (out jack). Next, attach this cable to the in jack of the converter box.
    • Out from Antenna --> In to the converter box
  2. Take a second coaxial cable and connect it to the out jack on the converter box. Then, connect it to the in jack on the VCR/DVR.
    • Out from converter box --> In to the VCR/DVR
  3. Take your third coaxial cable and connect it to the out jack of the VCR/DVR. Then, attach the other end to your TV (in jack).
    • Out from the VCR/DVR --> In to the TV

Conclusion

References for How to Switch to Digital TV



Source: www.mahalo.com

Powered by Epik